High Pectin Recovery from Cocoa Husks Using an Autoclave Approach: An Analysis of Its Physicochemical, Structural, and Genotoxicity Properties.

Pectin was extracted from cocoa husks, a food-processing biowaste, using an autoclave approach. A Box-Behnken design (BBD) and response surface methodology (RSM) were used to optimize pectin extraction. Three factors including extraction time (5-40 min), temperature (105-135 °C), and solid to liquid ratios (SLRs) (10-30 w/v) were employed. Results showed that the optimal conditions for high cocoa-husk-pectin (CHP) yield of 26.22% was 105 °C for 5 min with an SLR at 20 w/v. The physicochemical characteristics of CHP were compared with commercial high-methoxyl pectin (CHMP) and commercial low-methoxyl pectin (CLMP). CHP was classified as low-methoxyl pectin, with a degree of esterification at 34.74% and methoxyl content of 5.08%. The galacturonic acid content of CHP was 32.71% which was lower than CHMP (72.69%) and CLMP (41.24%). The intrinsic viscosity and viscosity-average molecular weight was similar to CLMP but higher than CHMP. No significant differences in water-holding capacity were found among samples. CHP showed higher oil-holding capacity but lower solubility compared with commercial pectin. CHP solutions showed pseudoplastic behavior. The viscosities of CHP solutions improved at increasing concentrations and decreasing pH. The CHP solution viscosities were lower than CLMP at the same condition. The viscoelastic properties of CHP solutions increased at higher concentrations, with the optimal value at pH 3. CHP showed no genotoxicity when assayed using the Ames test. Autoclave extraction as an accessible fast method showed potential for high pectin yield recovery from cocoa husks.

Optimization of Enzyme-Assisted Mechanical Extraction Process of Hodgsonia heteroclita Oilseeds and Physical, Chemical, and Nutritional Properties of the Oils.

Hodgsonia heteroclita subsp. Indochinensis W.J.de Wlide & Duyfjes (or Making in Thai) is a neglected and underutilized crop (NUC) with high fat containing nuts. In this study, the enzyme-assisted mechanical extraction of H. heteroclita seed oil was investigated using response surface methodology (RSM) to predict the optimal fat extraction conditions. The most efficient enzyme used in the experiment was a mixture of Flavourzyme® and Viscozyme® (1:1, w/w). The predicted maximum oil yield was 46.44%, using the following extraction conditions: 2.98% (w/w) enzyme loading, 48 °C incubation temperature and 76 min of incubation time. H. heteroclita seed oil obtained from heat and enzymatic pretreatments exhibited the highest lightness and viscosity. The chemical properties of this seed oil, including water and volatile compounds (≤0.2% w/w), acid value (≤4.0 mg KOH/g), peroxide value (≤15 mEq of active oxygen/kg) and soap content (≤0.005% w/w), were within the acceptable levels specified by the Codex Alimentarius (2019). H. heteroclita seed oil obtained from heat and enzymatic pretreatments contained the highest content of δ-tocopherol (88.29 mg/100 g) and omega-6 fatty acids (48.19 g/100 g). This study is the first to report on the enzyme-assisted mechanical extraction of H. heteroclita oilseeds as a promising plant material for vegetable oil production.

Green Extraction of Hodgsonia heteroclita Oilseed Cake Powder to Obtain Optimal Antioxidants and Health Benefits.

Most biowaste produced by domestic food preparation and food processing has no value, is difficult to manage, and is detrimental to the environment. Oil extraction from Hodgsonia heteroclita seeds produces large amounts of oilseed cake powder (OCP) as biowaste. The extraction of residual phytochemicals using simple and eco-friendly methods can increase the economic utility of OCP. This study optimized the extraction process for Hodgsonia heteroclita OCP using a Box-Behnken design and response surface methodology. The optimized extraction condition was 30 °C for 5 h in 50% (v/v) ethanol, giving a total phenolic content (TPC) of 414.23 mg of gallic acid equivalent/100 g dry weight (DW). Phytochemical profiles of OCP using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ECI-MS/MS) identified 4-hydroxybenzoic acid and ferulic acid as the major compounds. Antioxidant activities and enzyme inhibitory activities toward the major enzymes involved in obesity (lipase), diabetes (α-amylase, α-glucosidase, and dipeptidyl peptidase IV (DPP IV)), Alzheimer's disease (acetylcholinesterase (AChE), butyrylcholinesterase (BChE), and ß-secretase-1 (BACE-1)), hypertension (angiotensin-converting enzyme, ACE), and genotoxicity were also investigated. Results showed that H. heteroclita OCP possessed antioxidant activity and potential inhibitory activities against BACE-1 and ACE, while also being genome-safe. A simple extraction method for H. heteroclita OCP was developed, demonstrating the enhanced value of its phytochemical and health-promoting qualities.

Food Fortification of Instant Pulse Porridge Powder with Improved Iron and Zinc Bioaccessibility Using Roselle Calyx.

Undernutrition and mineral deficiencies negatively impact both the health and academic performance of school children, while diets high in phytic acid and some phenolics inhibit the absorption of minerals such as iron and zinc. This study developed instant porridge powders rich in iron and zinc using pregelatinized chickpea flour (PCPF) and pregelatinized foxtail millet flour (PFMF) and assessed the potential of utilizing roselle calyx powder (RCP) as a source of organic acids to enhance its iron and zinc bioaccessibility. Physical properties, nutrients, mineral inhibitors and in vitro iron and zinc bioaccessibility of different proportions of PCPF, PFMF and RCP in instant porridge powders were evaluated. Three instant porridge powder formulations including instant chickpea powder (ICP) using PCPF, instant composite flour (ICF) using PCPF and PFMF and instant pulse porridge powder (IPP) using PCPF, PFMF and RCP were developed. Results show that all instant porridge powders were accepted by sensory evaluation, while different ingredients impacted color, consistency and the viscosity index. Addition of RCP improved the bioaccessibility of iron (1.3-1.6-fold) and zinc (1.3-1.9-fold). A 70 g serving of these instant porridge powders substantially contributed to daily protein, iron and zinc requirement for children aged 7-9 years. These porridge powders hold potential to serve as school meals for young children in low-to-middle income countries.

Improvement of Sourdough and Bread Qualities by Fermented Water of Asian Pears and Assam Tea Leaves with Co-Cultures of Lactiplantibacillus plantarum and Saccharomyces cerevisiae.

Qualities of sourdough and sourdough bread using fermented water from Asian pears and Assam tea leaves with Lactiplantibacillus plantarum 299v and Saccharomyces cerevisiae TISTR 5059 as starter cultures were evaluated. Changes in the growth of lactic acid bacteria and yeast, pH, sourdough height, total phenolic contents (TPCs) and antioxidant activities detected by ORAC, FRAP and DPPH radical scavenging assays were monitored during sourdough production. Mature sourdough was achieved within 4 h after 18 h retard fermentation and used for bread production. The bread was then analyzed to determine chemical and physical properties, nutritional compositions, TPCs, antioxidant activities and sensory properties as well as shelf-life stability. Results showed that fermented water significantly promoted the growth of yeast and increased TPCs and antioxidant activities of sourdough. Compared to common sourdough bread, fermented water sourdough bread resulted in 10% lower sugar and 12% higher dietary fiber with improved consumer acceptability; TPCs and antioxidant activities also increased by 2-3 times. The fermented water sourdough bread maintained microbial quality within the standard range, with adequate TPCs after storage at room temperature for 7 days. Fermented water from Asian pears and Assam tea leaves with L. plantarum 299v and S. cerevisiae TISTR 5059 as starter cultures improved dough fermentation and bread quality.